Berita

Pengukur level radar saat ini banyak digunakan. Prinsip kerjanya adalah menggunakan deteksi gelombang radar, memasang probe, mengandalkan pantulan gelombang radar, dan kemudian menggunakan efek Doppler untuk menghitung data. Dalam proses pemasangan dan penggunaan, jika kita dapat memahami prinsip pengukuran dengan lebih baik, hal ini akan memudahkan penggunaan.

The precision digital pressure gauge alkc600 is a kind of pressure gauge with high measurement accuracy, stable performance and easy operation. The precision digital pressure gauge alkc600 produced by eleco measurement and control equipment (Huai'an) Co.,

The radar level meter uses a high frequency oscillator as the radar wave generator. The radar wave generated by the generator is led to the radar antenna through the waveguide tube, and then propagates outward. When the radar wave reaches the detected liquid level, one part is absorbed and the other part is reflected back to the radar antenna for receiving. The liquid level measurement is realized

The instrument consists of measuring system (including flange joint and corrugated diaphragm), transmission indicating mechanism (including connecting rod, gear transmission mechanism, pointer and dial) and shell (including watch case and cover ring). The shell of the instrument is splash proof and has good tightness, so it can protect the internal mechanism from contamination.

The electromagnetic flowmeter is one of the commonly used flowmeters. The electromagnetic flowmeter is praised by many users for its advantages of large flow range, wide aperture range, non-blocking, corrosion resistance and so on

There are many kinds of instruments and equipment for industrial flow measurement. In the use of industrial instruments, different instruments and equipment are selected because of different environments

gas turbine flowmeter If the flow rate of the pipeline is lower than the initial flow rate of the flowmeter or no flow rate of the flowmeter, the solution is to increase the flow rate of the fluid to meet the requirements of the flowmeter;

Tuning fork level switch is a new type of level switch. The tuning fork is excited by the crystal to form vibration. When the tuning fork is immersed in liquid, the vibration frequency changes. This frequency change is detected by the electronic circuit and outputs a switch value